VOCA Race Head 46m Yamaha DT LC/D, TZR 80 LC Blue

<p>AIRSAL aluminum cylinder head (040713476)</p>

AIRSAL

<p>AIRSAL aluminum cylinder head (04084248)</p>

AIRSAL

<p>The world famous golden VHM head with exchangeable combustion chamber is specially developed for optimal power output during the whole race and has an improved water duct.</p> <p>It's manufactured from a high quality alloy and O-rings are used for the sealing.</p> <ul> <li>More engine power</li> <li>Better heat transference</li> <li>More resistance to detonation</li> <li>Exchangeable combustion chambers available</li> </ul>

VHM

<p>The world famous golden VHM head with exchangeable combustion chamber is specially developed for optimal power output during the whole race and has an improved water duct. It's manufactured from a high quality alloy and O-rings are used for the sealing.<br /> <br /> O-ring Ø83x2 is included, as well as 5 copper washers and 5 nutcaps. Vent screw (M6x6) and small copper washer (BD36006) are included and mounted on the head.<br /> <br /> Use VHM standard insert AE32240-E</p> <ul> <li>More engine power</li> <li>Better heat transference</li> <li>More resistance to detonation</li> <li>Exchangeable combustion chambers available</li> </ul> <p class="remarks">Inserts must be ordered seperately, see complementary parts below. O-ring Ø83x2 is included.</p> <p>VHM AA33151</p>

VHM

<span>For Thermal group 3112371</span>

MALOSSI

<p>CYLINDER HEAD AIRSAL (043002476)</p>

AIRSAL

<p>AIRSAL Racing X Trem aluminum cylinder head (04064350)</p>

AIRSAL

<p>CYLINDER HEAD BARIKIT BRK 74CC DERBI VARIANT START 5</p>

BARIKIT

<p>This insert with 10.80cc volume is the VHM standard for Honda CR125R 2000 - 2002 and is developed for the best overall performance. The combustion chamber fits the VHM cylinder head perfectly and is easy to change. The last numbers of the part number are engraved on the insert for indentification.<br /> <br /> Use in combination with VHM head AA33055</p> <ul> <li>Best overall performance</li> <li>Quick to adjust</li> <li>Good resistance to detonation</li> </ul> <p class="remarks">This insert does not fit into an OEM head, only a VHM cylinder head.</p> <p>VHM AE32058-E</p>

VHM

<p>This insert with 20.60cc volume is the VHM standard for Honda CR250R 1997 - 2001 and is developed for the best overall performance. The combustion chamber fits the VHM cylinder head perfectly and is easy to change. The last numbers of the part number are engraved on the insert for indentification.<br /> <br /> Use in combination with VHM head AA33003</p> <ul> <li>Best overall performance</li> <li>Quick to adjust</li> <li>Good resistance to detonation</li> </ul> <p class="remarks">This insert does not fit into an OEM head, only a VHM cylinder head.</p> <p>VHM AE32020-B</p>

VHM

<p>This insert with 8.00cc volume is the VHM standard for Honda CR85R 2004 and is developed for the best overall performance. The combustion chamber fits the VHM cylinder head perfectly and is easy to change. The last numbers of the part number are engraved on the insert for indentification.<br /> <br /> Use in combination with VHM head AA33057</p> <ul> <li>Best overall performance</li> <li>Quick to adjust</li> <li>Good resistance to detonation</li> </ul> <p class="remarks">This insert does not fit into an OEM head, only a VHM cylinder head.</p> <p>VHM AE32071-L</p>

VHM

<p>For fit Rotax 122&amp;123 and Rotax Max engines with <strong>ITALKIT 125 cylinder.</strong></p> <p>All years with dommed piston and D54mm <strong>125 cm3 ITALKIT Cylinder</strong>.</p> <p>- Botton gasket 0,30mm</p> <ul style="list-style-type:disc;"> <li>Volume: 9,75 cc</li> <li>Compression ratio: 13,76 : 1</li> <li>Squish : 1,15 mm</li> </ul> <p>- Botton gasket 0,50mm</p> <ul> <li>Volume: 10,20 cc</li> <li>Compression ratio: 13,20 : 1</li> <li>Squish : 1,35 mm</li> </ul>

ITALKIT

<p>This insert with 8.40cc volume is the VHM standard for Yamaha YZ85 and is developed for the best overall performance. The combustion chamber fits the VHM cylinder head perfectly and is easy to change. The last numbers of the part number are engraved on the insert for indentification.<br /> <br /> Use in combination with VHM head AA33176</p> <ul> <li>Best overall performance</li> <li>Quick to adjust</li> </ul> <p class="remarks">The insert does not fit into an OEM head, only a VHM cylinder head.</p> <p>VHM AE32286-E</p>

VHM

<p>AIRSAL aluminum cylinder head (041350476)</p>

AIRSAL

<p>Cylinder head Airsal AM6 Ø50 04134950</p>

AIRSAL

<span><p>Cylinder head HTSR Kymco Dink 50 Lc Diameter 47 mm</p></span>

MALOSSI