<p>Conical handlebar aluminium red 28,6mm-22,2mm</p>
<ul>
<li>Diameter at the clamps: 28,6 mm</li>
<li>Diameter at the bar end: 22,2 mm</li>
<li>This handlebar gives less flexibility and offers more tensile strength in all extreme situations.</li>
<li>Height: 89 mm</li>
<li>Length: 725 mm</li>
</ul>
<p>Conical handlebar aluminium silver 28,6mm-22,2mm</p>
<ul>
<li>Diameter at the clamps: 28,6 mm</li>
<li>Diameter at the bar end: 22,2 mm</li>
<li>This handlebar gives less flexibility and offers more tensile strength in all extreme situations.</li>
<li>Height: 89 mm</li>
<li>Length: 725 mm</li>
</ul>
<p>Oversize handlebar conversion clamps.</p>
<p>This adapter make your 22mm handle bar to 28mm<br /><br />These are designed to fit on/in to your existing top clamps to convert from 22.2mm (7/8) bars to the oversize of 28.6mm (11/8) type.</p>
<p>Just remove your old top bar clamps, bars and replace with new O/S bars.<br /><br />Colour: Natural machined/polished</p>
<p>New VOCA HB28 handlebars for mopeds and cross-bikes.</p>
<p>The VOCA handlebars HB28 are made out of 5mm thick, high quality T6 alloy, 28,6mm diameter.</p>
<p>Very resistant and very light, toped by a stunning VOCA design. 805mm wide, optionally to be reduced to 795mm or 788mm (cutting lines are laser-engraved on the surface).</p>
<p>The height between the center of the clamps and the extremes of the handlebar is 94mm.</p>
<p>The perfect choice for all mopeds equipped with Ø 28,6mm handlebar clamps.</p>
<p>If you bike has a 22,2mm handlebar you should complete the kit with 28,6mm handlebar adapters.</p>
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent
https://mmgracingstore.com/en/handlebars/2084-conical-handlebar-o286mm-gold.html2084Conical Handlebar Ø28.6mm GOLD<p>Conical handlebar aluminium gold 28,6mm-22,2mm</p>
<ul>
<li>Diameter at the clamps: 28,6 mm</li>
<li>Diameter at the bar end: 22,2 mm</li>
<li>This handlebar gives less flexibility and offers more tensile strength in all extreme situations.</li>
<li>Height: 89 mm</li>
<li>Length: 725 mm</li>
</ul>https://mmgracingstore.com/11462-home_default/conical-handlebar-o286mm-gold.jpg33.8195instockV PARTS52.0327.953515.05/Home/Home/Handlebars/Home/FRAME & CHASSIS PARTS CRM 125/Home/FRAME & CHASSIS YAMAHA WR125/Home/FRAME & CHASSIS PARTS APRILIA RX / SX 125/Home/FRAME & CHASSIS PARTS CRM 75/Home/FRAME & CHASSIS PARTS DT125 2T/Home/FRAME & CHASSIS PARTS DT 80 LC/Home/FRAME & CHASSIS PARTS SENDA 50 2006 (D50B0)/Home/FRAME & CHASSIS PIT BIKES/Home/FRAME & CHASSIS PARTS MRT / SMX 50 (AM6)/Home/FRAME & CHASSIS PARTS RRT 50 (AM6)/Home/FRAME & CHASSIS PARTS MTX 80/Home/FRAME & CHASSIS PARTS RIEJU MR80208120822083
We use cookies to improve your shopping experience. You will be able to select our and third-party cookies that you wish to use at any time.
See cookie policy