<p>Dellorto 8530 K Type Needle to fit Dellorto VHSB34 carb as fitted to Aprilia RS125.</p>
<p>Polini recommends fitting K21 needle for use with their 154 cc kit.</p>
<p>K57 Standard For RS125</p>
<p>K25 Recomended By Italkit For 140 Kit</p>
<p>Air filter Malossi 20X40</p>
<p>TECHNICAL SPECIFICATIONS</p>
<ul>
<li>Filters made of polyurethane foam, self-extinguishing, two layers coupled by a special hot forming process that does not alter its filtering characteristics.</li>
<li>The first layer is made of a red filtering media: open cell polyurethane foam with a porosity of 45 ppi *.</li>
<li>The second layer is made of a black filtering media: open cell polyurethane foam with a porosity of 60 ppi *.</li>
</ul>
<p>(*ppi: pores per inch)</p>
<p>To Fit The Aprilia RS125, Futura, Tuono , AF1 , SX/RX and Rotax Max Kart ... Fits All Years.</p>
<p>This Reed Valve Had Double The Set Of Reeds Compared To Std Reed Valve, This Gives The More Flow Though The Inlet System Which In Turn Gives You Better Throttle Response And More Punch Out Of The Corner.</p>
<p><strong>WITHOUT Inlet Manifold</strong></p>
<p>Carbon reed valves</p>
<p>To Fit The Aprilia Rs125,Fits All Years.</p>
<p>This Reed Valve Had Double The Set Of Reeds Compared To Std Reed Valve, This Gives The More Flow Though The Inlet System Which In Turn Gives You Better Throttle Response And More Punch Out Of The Corner.</p>
<p>Comes Complete With A 40 mm inlet manifold to fit the Dellorto 34mm carb, <strong>not compatible with PWK carbs type Polini, Oko, Stage6....</strong></p>
<p>Vetronite reed valve.</p>
<p>To Fit The Aprilia Rs125,Fits All Years.</p>
<p>This Reed Valve Had Double The Set Of Reeds Compared To Std Reed Valve, This Gives The More Flow Though The Inlet System Which In Turn Gives You Better Throttle Response And More Punch Out Of The Corner.</p>
<p>Vetronite reed valve.</p>