<p>New VOCA HB28 handlebars for mopeds and cross-bikes.</p>
<p>The VOCA handlebars HB28 are made out of 5mm thick, high quality T6 alloy, 28,6mm diameter.</p>
<p>Very resistant and very light, toped by a stunning VOCA design. 805mm wide, optionally to be reduced to 795mm or 788mm (cutting lines are laser-engraved on the surface).</p>
<p>The height between the center of the clamps and the extremes of the handlebar is 94mm.</p>
<p>The perfect choice for all mopeds equipped with Ø 28,6mm handlebar clamps.</p>
<p>If you bike has a 22,2mm handlebar you should complete the kit with 28,6mm handlebar adapters.</p>
<p>New VOCA HB28 handlebars for mopeds and cross-bikes.</p>
<p>The VOCA handlebars HB28 are made out of 5mm thick, high quality T6 alloy, 28,6mm diameter.</p>
<p>Very resistant and very light, toped by a stunning VOCA design. 805mm wide, optionally to be reduced to 795mm or 788mm (cutting lines are laser-engraved on the surface).</p>
<p>The height between the center of the clamps and the extremes of the handlebar is 94mm.</p>
<p>The perfect choice for all mopeds equipped with Ø 28,6mm handlebar clamps.</p>
<p>If you bike has a 22,2mm handlebar you should complete the kit with 28,6mm handlebar adapters.</p>
<p>Buzzetti crankshafts disassembly tool.</p>
<p>For disassembly of the crankshaft of the engine case.</p>
<p>Length of the arms: 115 mm by 105 mm long hole</p>
<p>Release pin: M 22 with 17 mm drive</p>
<p>Set of CNC machined handlebar caps VOCA Racing.</p>
<p>High quality alloy handlebar caps available in anodized RED.</p>
<p>The laser engraved logotype and the black anodized screw of the cap complete the very clean VOCA design.</p>
<p>The VOCA handlebar caps protect the endings of the grip and assure a special look of your handlebar.</p>
<p>VOCA HB28 handlebar protector for Ø28mm handlebars (without reinforcement bar).</p>
<p>The protector is made of high density injected foam, which absorbs and reduces the energy of any impact that you can give with the handlebar clamps.</p>
<p>VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.</p>
<p>The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design.</p>
<p>This head set comes with following parts: 1x cylinder head 1x standard insert (12,00cc)<br /><br /></p>