<p>High Performance brake bluid with very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid.</p>
<p>Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.</p>
<p>Brake fluid Motul RBF 700 Factory Line 500ml</p>
<p>Designed mainly for competition, this Motul RBF700 brake fluid focuses on performance without compromise.</p>
<p>It is suitable for intensive use, with outstanding temperature resistance (boiling point at 336°C).</p>
<p>Braking will remain constant even under extreme conditions.</p>
<p>Long life, compatible with all DOT4 systems.</p>
<p>CHAIN LUBE MOTUL C4 FACTORY LINE 400ml</p>
<p>Each motorcycle part needs a specific care.</p>
<p>Launched in 2011, Motul MC CARE line has been developed to fully maintain and take care of the motorcycle, the motorcyclist and its equipment.</p>
<p>Motul C4 Chain Lube FL is a white colored lubricant for racing motorcycle chains: Speed and Endurance. Based on solid additives AW / EP.</p>
<p>For inserting ball bearings, shafts and bushings in spaces.</p>
<p>Evenly spray components or objects to be treated for a few seconds.</p>
<p>The freezing effect can be varied according to the duration of spraying.</p>
<p>Harmless if used properly.</p>
<p>There is a risk of freezing on contact with the body.</p>
<div class="marketingSection AT_PublicationShortTextUSP">Soft compound for quick, easy and completely gas-tight assembly of sleeve (pipe plug) and flange connectors in exhaust systems.</div>
<div class="marketingSection AT_PublicationInstructions">
<ul>
<li>No complicated welding required</li>
<li>Becomes as hard as metal due to the heat from the exhaust</li>
<li>Temperature resistant up to approx. 700°C</li>
<li>Seals off permanently</li>
<li>Resistant to impacts and vibration</li>
<li>Not susceptible to rust — hence easy to dismantle</li>
</ul>
</div>
<p>Solvent-free, high-strength, low-viscosity, oil-resistant and anaerobic (without oxygen) hardening adhesive based on a di-methacrylate tester.</p>
<p>Temperature range: - 60 °C to + 150 °C. For fixing coaxial joining parts, such as bearings, bushes, shafts …</p>